Olight’s Oclip 2 Ultra Brings an Aimable Beam to the Workbench

With a 360-degree rotating clip, a 115-degree tilting head, and a combined UV emitter, this pocket-sized task light keeps your workbench clear and aims straight into tight hardware recesses

0

With a 360-degree rotating clip, adjustable lighting angles, powerful flood and spotlight modes, and integrated UV and red-light emitters, Olight’s Oclip 2 Ultra smart flashlight brings greater flexibility to hands-free illumination. The obvious place to set down a flashlight is the same spot you need for a row of screws. Olight’s Oclip 2 Ultra solves that problem by lifting the light off the bench entirely.

A spring clip and two magnetic mounting points anchor the 2.37-inch body to your work, and a dual-axis pivot lets you re-aim the beam after you attach it. That matters when the part you need to see hides around a corner. Olight packs a 580-lumen flood, a 450-lumen spotlight, a red night-vision mode, and a UV emitter into that body, and it ships the whole kit at 2.8 ounces.

Olight’s Oclip 2 Ultra Smart Flashlight
An Oclip 2 Ultra directs light into a tight work area.

Set the mount, then set the beam

The clip grips material up to 14 mm (0.55 inches) thick. A steel shelf or compatible toolbox gives you two other attachment points: one magnet sits in the tail, and another sits in the clip. Once the light is in place, you can turn the clip through a full 360 degrees and tilt the head up to 115 degrees. Both pivots stay where you set them, and Olight rates each axis for 10,000 test cycles, so the joints should keep their grip long after the novelty fades. A hole in the clip also lets you hang the light from a hook or lanyard when no steel is nearby.

Picture yourself taking a small appliance apart on the bench. The flood beam covers the tray that holds your fasteners. Tilt the head down, and that same light fills the recess you are working in. When the mounting surface sits farther back, the focused spotlight gives you a narrower beam to aim at the part.

ALSO READ
How to Choose an Air-Cooled Industrial Chiller for Manufacturing Equipment

Olight rates the flood at 580 lumens on Turbo and the spot at 450 lumens, with a peak intensity of 4,225 candela and a maximum reach of 130 meters (427 feet). Each beam also offers five brightness levels plus strobe and beacon modes, and a three-way rotary selector with a side power button lets you switch between them by feel rather than by squinting.

A fourth light for inspection

The Oclip 2 Ultra puts ultraviolet and red light into a single in-house emitter. Olight rates the UV output at up to 800 mW, with a 300 mW low setting that conserves the battery for longer inspections. That gives you a fast way to check parts and materials for UV-responsive markings, such as security marks, tracer dyes, or residue, without leaving your bench. Switch back to white when you need to read a label or lay out the tools for the next step.

Red earns its place in a dark work area. The 4-lumen low setting helps you find a control on a piece of equipment without flooding the room, and the 40-lumen high setting stretches your visibility for about three hours. A 20-lumen flashing mode rounds out the red options.

For jobs that demand closer scrutiny, the white flood steps down through several levels: 300 lumens, a 100-lumen medium setting rated for three and a half hours, a 10-lumen low that runs for 25 hours, and a 1-lumen moonlight mode that lasts up to 144 hours. Turbo burns brightest, so expect it to hold 580 lumens only briefly before the light steps down to protect the cell; the high setting at 300 lumens sustains for roughly an hour.

ALSO READ
Understanding the Interchain Stack
The Oclip 2 Ultra in Onyx Black with its emitters facing forward
The Oclip 2 Ultra in Onyx Black with its emitters facing forward.

A small tool that can stay in the kit

The Ultra builds its body and head from Olight’s scratch-resistant OAL aluminum, which Olight says is nearly twice as hard as standard 6061 aluminum. The clip components use 6061-T6 aluminum. The company rates the light IP66 for dust and water and 2 meters (6.6 feet) for drops, so a splash or a tumble off the bench will not end the project. A 600 mAh rechargeable battery powers the light, and the package includes a USB-C charging cable. At 2.8 ounces, the light also moves onto an apron strap or into a tool pouch when your project takes you away from the bench.

Olight also sells an Ultra Premium kit that adds a 1,000 mAh Mobile Charging Dock. The dock snaps onto the light, tops up the cell, displays the battery level of both units, and roughly doubles your total runtime. You can detach it and carry it as a backup battery for long jobs. It carries an IPX6 rating and a 3.3-foot drop rating.

A magnetic MCC charging cable is available separately. The Ultra also includes OclipBeat, a small multicolor light that breathes for about 15 seconds when you flip the head up, with its color reflecting your cumulative hours of use. It is a usage record, not a light source, but it adds a little personality to a tool that mostly stays out of your way.

A Versatile Addition to a Technician’s Everyday Carry Kit

Olight Oclip 2 Ultra brings together adjustable mounting

The Olight Oclip 2 Ultra brings together adjustable mounting, multiple lighting technologies, and a durable portable design in a compact flashlight. Its combination of floodlight, spotlight, red light, and UV illumination makes it useful beyond ordinary nighttime lighting, particularly for technicians, mechanics, DIY enthusiasts, and outdoor users who need flexible illumination.

ALSO READ
Top 5 Strategies for Cloud Cost Optimization

Its ability to attach magnetically or through a spring-loaded clip also makes it a practical alternative to conventional handheld flashlights when both hands need to remain free. Whether mounted on a toolbox, attached to an apron, or carried in a pocket, the adjustable head allows users to position the beam around their immediate working environment.

Olight lists the standard Ultra at $69.99 in Olive Green, Onyx Black, and Amber Orange for Black Friday shopping, and the package includes the flashlight, a USB-C charging cable, and a user manual. The Ultra Premium kit with the charging dock costs $94.99. Olight backs the light with a lifetime warranty in the US and a two-year warranty on the dock.

If your work needs a compact EDC flashlight that combines hands-free mounting with adjustable illumination and specialized inspection lighting or occasional UV checks, the Oclip 2 Ultra presents an interesting option to consider for a workshop, toolbox, or everyday carry collection.

Previous ItemAEKE S1 Pro Pairs Smart AI Strength Coaching with a Black Friday Offer
Felix Silas
Felix Silas is a tech ardent, an Android fanatic, a computer user and very vast with mobile tips and tweak. He's dedicated to churning out tips on technology and Innovations.

LEAVE A REPLY

Please enter your comment!
Please enter your name here